Clutches

离合器

Reell's standard electric wrap spring clutch design gives you the ability to drive a high amount of torque in a small package. Available in a broad range of sizes and load capacities for motion control applications up to 75 lb-in (8.5 N-m) total load, our electric clutch line is ideally suited for intermittent motion applications requiring consistent timing performance over life. Long life (LL) electric clutches are designed for applications with high input revolutions, extending the clutch bearing life by 2-10x depending on the load and duty cycle requirements.

 

  • Reell EC15 离合器

    The Model EC15 transfers up to 1.7 N-m (15 lb-in) of total load with consistently repeatable performance for one million actuations.

  • Reell EC20 CCBLL

    The patented model EC20 Clutch Brake Long-Life (EC20CBLL) design provides stopping and holding torque in addition to clutching. It provides 2.26 N-m (20 lb-in) of total load over a life of 1 million actuations

     

     

  • Reell EC25LL 离合器

    The model EC25 Long-Life (EC25LL) design is optimized for applications which have higher hour and/or input revolution requirements up to 80 million bearing revolutions.

  • Reell EC30LL 离合器

    The model EC30 Long-Life is optimized for applications which have hour and/or input revolution requirements up to 80 million bearing revolutions. It provides 3.39 N-m (30 lb-in) of total load over a life of 1 million actuations.

  • Reell EC30XP

    The model EC30XP high performance clutch has a slightly larger bore allowing the use of a stiffer shaft for higher load applications. It provides 3.39 N-m (30 lb-in) of total load over a life of 1 million actuations.

  • Reell EC75LL 离合器

    The model EC75 Long-Life is optimized for applications which have hour and/or input revolution requirements up to 80 million bearing revolutions. It is rated for one million actuations at 8.5 N-m (75 lb-in) of total load.

  • Reell 防滑装置

    Reell in-line slip devices increase the life of clutch components by providing a constant inline torque which reduce the engagement shock due to inertia.

选项

最大负载 1.7 N-m (15 lb-ins)
方向 顺时针和逆时针
电压 12 直流电压(VDC),24 直流电压(VDC)
接头 模塑接头,8英寸含铅线圈
孔径 6毫米、1/4英寸
十字轴

选项

最大负载 2.26 N-m(9.07 kg-in)
方向 顺时针和逆时针
电压 24 VDC始动电压/12VDC维持电压
接头 模塑接头
孔径 8毫米
十字轴

选项

最大负载 2.83 N-m (25 lb-in)
方向 顺时针和逆时针
电压 12 VDC、24 VDC
接头 模塑接头,8英寸含铅线圈
孔径 6毫米,1/4英寸
十字轴

选项

最大负载 3.39 N-m(13.61 kg-in)
方向 顺时针和逆时针
电压 12 VDC、24 VDC
接头 模塑接头,8英寸含铅线圈
孔径 6毫米、8毫米
十字轴

选项

最大负载 3.39 N-m(13.61 kg-in)
方向 顺时针和逆时针
电压 12 VDC、24 VDC
接头 模塑接头,8英寸含铅线圈
孔径 6毫米、8毫米
十字轴

选项

最大负载 8.5 N-m (75 lb-ins)
方向 顺时针和逆时针
电压 12 VDC、24 VDC
接头 8英寸含铅线圈
孔径 3/8英寸、5/8英寸、1/2英寸、10毫米。12毫米和15毫米
十字轴

SA

转矩 0.2, 0.4, 0.8, 0.95 N-m
方向 顺时针和逆时针
孔径 6毫米、1/4英寸、8毫米和5/16英寸
十字轴

SB

转矩 0.1, 0.2, 0.4, 0.7 N-m
方向 顺时针和逆时针
孔径 6毫米、1/4英寸、8毫米和5/16英寸
十字轴

SC

转矩 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 N-m
方向 顺时针和逆时针
孔径 6毫米、8毫米和5/16英寸
十字轴、D形轴

SC-HT

转矩 4.0, 5.0, 6.0, 7.5 N-m
方向 顺时针和逆时针
孔径 8毫米
D形轴

离合器引线头

匹配AMP104257接头和24GA线缆的可选引线头,长度380mm